Rifles & long guns - Revolvers & pistols - Cased pistols
Flintlock & percussion pistols - Derringers, pocket & travelling pistols - Armour, Accessories & Books
A good 24 bore Customs/Sea Service percussion pistol. The wood is un-scrubbed and retains very good Board of Ordnance and Store keeper’s marks to the stock. There are the usual knocks and scratches to the wood and all the steel parts are to a bright finish with no pitting. The lock is marked ‘Crown GR Tower 1843’ Very good working order and condition.
Stock No. 5393
A very good 50 bore Lefaucheux marked percussion target pistol. The barrel retaining most original blue with some small knocks, the rest of the metal work: lock, trigger guard and butt cap to a case-hardened grey finish. It has a very fine multi-grooved bore. The well carved and fluted wooden stock retains much original finish with one or two very minor marks. The pistol is marked ‘1’ of a pair and was probably originally cased. We believe this is a ‘bought-in’ gun by Lefaucheux as it has Belgian proof marks to the bottom of the barrel. This was a common practise, both here and on the Continent, where top makers supplemented their production by buying in guns from other makers and engraving their own name on the guns. Barrel length 9½in. Overall length 17in. Very good working order and condition.
Stock No. 5379
A 38 bore turn-off barrel flintlock boxlock pocket pistol by Prosser of Charing Cross. The pistol has a concealed trigger and the metal work is to a dark patina. There are some knocks and scratches to the barrel. It has a slab-sided wooden butt with a few knocks and a silver escutcheon. Good working order and fair to good condition. Barrel length 1½ in. Overall length 6in. Please see
Stock No. 5392 for an almost identical pistol by Prosser with the same initial to the escutcheon. Probably both were bought at the same time for household defence.
Stock No. 5376
A 38 bore boxlock flintlock boxlock pocket pistol with turn-off barrel by Prosser of Charing Cross. The metal work is to a dark patina and slightly sharper than Stock No. 5376. It has a slab-sided butt with a few small knocks, see Stock No. 5376 for a fuller description. Good working order and condition.
£445 Stock No. 5392
A three barrelled 80 bore tap action flintlock pistol by William Deakin. The metalwork is to a dark patina and it has a good slab-sided butt with virtually no marks. The pistol is fitted with an underslung bayonet operated by the trigger guard. Length of barrel group 3¼in. Overall length 9¼in. Good working order and condition.
Stock No. 5384
A very good 25 bore rifled target pistol the lock plate marked ‘Lassence-Ronge-Liege’. The heavy, octagonal, stub twist Damascus barrel has been re-browned and is very sharp with a good bore. The trigger guard, butt cap, action and lock plate retain some case hardening colours. The pistol has a good carved wooden butt with one or two minor marks. Barrel length 10½in. Overall length 16in. Good working order and condition.
Stock No. 5356
A good 40 bore octagonal barrelled rifled percussion target pistol, un-named. All the metal work is to a grey patina and there is a little wear to the corners of the barrel flats. There is a cap trap to the butt. The wood retains much original varnish with a few small knocks. The gun has a set trigger and a good bore. Good working order and condition.
Stock No. 5355
An arsenal shortened Sea Service flintlock pistol. The metal work is to a grey finish but with no pitting. It has a steel ram rod and good wood with minor knocks. Good working order and condition.
Stock No. 5249
A 54 bore cannon barrelled turnoff flintlock pocket pistol by R. Waren. The metal work is to a dark grey patina, but is nice and clean. It has a rolled trigger guard which is also a sliding safety. The pistol retains all it’s silver wire inlay to the butt. Good working order and condition. Overall length 8in. Barrel length 3in.
Stock No. 5287
A 38 bore double barrelled percussion travelling pistol by J. Braddell, Belfast. The metal work is to a grey patina and there are traces of colour in sheltered spots. It has a swivel ramrod and butt trap. This pistol has very finely chequered wooden grips with no damage and a silver escutcheon inset into the butt. Good working order and condition. Overall length 9½in. Barrel group 4in.
Stock No. 5288
A very good, very heavy barrelled 15 bore percussion overcoat pistol by Parsons. The metalwork is to a dark patina, the wood retains nearly all it’s original varnish with a silver escutcheon to the butt. Very good working order and condition. Overall length 10½in. Barrel length 5in.
Stock No. 5169
A 25 bore saw-handled percussion duelling/officer’s pistol by Holmes, Liverpool. The pistol has a browned stub twist barrel and very good wood retaining nearly all it’s original varnish. It has a white metal fore-end cap, ramrod pipe and trigger guard. The pistol retains it’s original ramrod. Very good working order and condition.
A 25 bore Coastguard percussion pistol. The metalwork is to a clean, bright finish. The lock is marked ‘VR Tower 1844’. The gun has a brass trigger guard and butt cap with swivel lanyard loop. The wood is good and unscrubbed and is to a smooth dark patina with a few minor knocks.
Stock No. 5208
A very fine pair of 21 bore flintlock brass barrelled travelling pistols by Bath & Co. (unrecorded). The guns are London prooved, have rolled trigger guards with acorn finials. The wood is virtually un-marked and retains all original varnish. They have their original ram rods, one with worm. A very fine and crisp pair of pistols, difficult to find in this conditions. Barrel length 8in. Overall length 13in. Very good working order and fine condition.
Stock No. 5244
A good 1801 pattern Long Sea Service flintlock pistol. The barrel is to a dark patina and the lock is to a grey finish. It has brass butt cap, trigger guard and ram rod pipes. The pistol has good wood with the usual small knocks and scratches. The ram rod is probably a replacement. Good working order and good condition.
Stock No. 5213
A 16 bore Heavy Dragoon flintlock pistol. The metalwork is to a grey patina, the lock is marked ‘Crown GR Edge 1760’. There is a crack to the trigger guard tang where the screw goes through. There are one or two repairs to the wood and it has a non-original ramrod. Barrel length 12ins. Overall length 19in. Good working order and condition.
Stock No. 5191
A very crisp 50 bore early top hat percussion pistol by Ward of Warrington. The pistol has very sharp metal work to the action and barrel with a few minor marks. It has a concealed trigger and a fine slab sided butt with or or two very minor knocks. Barrel length 4½in. Overall length 6¼in. Very good working order and condition.
Stock No. 5117
A pair of 40 bore flintlock boxlock pistols by I. Pratt of York. The guns have very sharp metal work which is to a dark patina. The pistols are number 3 and 4. One has a rolled trigger guard, the other is not rolled – this is the only difference between them. Both pistols have clean and sharp slab sided butts with one or two minor knocks. A nice, honest and sharp pair of pistols. Barrel length 1¾in. Overall length 6¼ in. Very good working order and condition.
Stock No. 5120
A fine, sharp flintlock 38 bore boxlock concealed trigger overcoat pistol by Cartmel of Doncaster. The pistol has a turn off barrel and there is some original blue to concealed trigger. The pistol has a good sharp brass boxlock action and the barrel has been re-blued. The pistol has a top safety and a silver escutcheon to a fine slab sided wooden butt with one or two minor marks. Very good working order and condition. Barrel length 1¾in. Overall length 6½in.
Stock No, 5112
A 16 bore flintlock officer’s/duelling pistol by Wheeler. The pistol has clean metalwork, Tower proof marks and a rolled trigger guard. The stock has been cracked in a couple of places and expertly repaired. It has a finely chequered butt and the ramrod has been replaced. Good working order and fair condition.
Stock No. 5082
A good .650 Customs/Coastguards percussion pistol with swivel ram rod. The metalwork is to a dark patina with no pitting. There is an arsenal repair to the wood under the lock and the wood has been cleaned but the Board of Ordnance and storekeeper's marks are still visible. The lock is marked VR Tower 1849 and there is a belt hook to the left hand side of the pistol. Very good working order and condition.
Stock No. 4939
A brass barrelled flintlock blunderbuss pistol by Moore. Very clean barrel with proof marks to the underside of the barrel. The brass furniture is in very good condition with the steel parts to a clean, dark patina. The pistol has a roller frizzen. The horn tipped ramrod is possibly a replacement. Very good working order and condition. Barrel length 6in. Overall length 11in.
Stock No. 4787
A good, early circa 1730 22 bore silver mounted turnoff pistol by Gandon. The metal is to a nice even dark patina. It has a silver side plate, escutcheon and grotesque butt cap. It has a rolled trigger guard and very nice, clean wood with a smooth patina. Barrel length 5¼in. Overall 11¼in.
Stock No. 4824
A double barrelled 25 bore back action lock percussion pistol by Rigby. The pistol has double platinum lines to the breech with platinum vents. There is a little pitting to the barrels and the steel parts have some wear and pitting. The wood is good with fine chequering to the stock. There are a few small knocks to the fore end and a small split from one escutcheon. The back strap is inscribed "Capt. Ward, X Hussars" Barrel length 4in. Overall 10in. Good working order and fair condition.
Stock No. 4788
A 54 bore double barrelled side by side boxlock flintlock pistol by J. & W. Richards. The gun has a sliding trigger guard safety, and a single cock with sliding cover to pan. It is London prooved and has very sharp metal to a grey finish. The pistol has a silver butt cap with hall marks for 1812 and silver maker's mark of William Freeth. (J. & W. Richards are recorded working at Staining Lane between 1808 and 1810) Very good working order and condition. Barrel group 4in. Overall length 10½in.
Stock No. 4684
A very good New Land flintlock service pistol dated 1800. The gun is marked Crown GR and Tower to lock and retains 10-15% original finish to barrel. It has good, un-scrubbed wood with minor storage knocks. There is an almost invisible repaired crack to the underside of the fore end where the ram rod enters the stock. The gun appears to be basically un-issued.
Stock No. 4424
A very fine New Land pattern flintlock service pistol in un-issued condition. The barrel retains nearly all its original brown and there is a crown GR and Tower to the lock. The gun has very fine unscrubbed wood dated 1800. There is a very old, small chip below the lock and an almost invisible repaired crack to the fore-end where the ramrod enters the wood. The gun has the usual minor storage knocks. Very good working order and fine condition.
Stock No. 4423
A Scandinavian military 13 bore percussion pistol converted from flintlock. This gun has, unusually, British proof marks. The metal is to a dark patina and there is a repaired crack on the right hand side of the fore-end above the lock and the usual crack on the left hand side from the rear screw to barrel. Good working order. Barrel length 8in. Overall 14in.
Stock No. 4375
A very fine Heavy Dragoon flintlock pistol by Abbey in sleepy condition. Storekeeper's marks to side of trigger guard and to ramrod channel and what appears to be the original ramrod. The pistol has very good wood to stock with a small sliver loss to right hand side of fore-end. (Very old loss) The stock is marked "1780". The pistol has fine brass furniture with no damage and the rest of the metal work is to a dark patina. A very fine example of a rare pistol.
Stock No. 4334
A very early naval flintlock pistol circa 1730 by David Collumbell. The pistol has all the features of an early sea service pistol: wavy sideplate, belt hook, large lobed brass buttcap, plain ram rod pipe, pointed trigger guard finial, barrel tang screw fixed through to the trigger guard, single screw on lock tail, shallow unbridled pan, trefoil frizzen spring finial, ridge on frizzen arm and swamped barrel.Overall length 14in. barrel length 8in. The gun is in very good working order and condition, with good wood. (David Collumbell apprentice to Gerrett Johnson in 1712. Gunmaker, King Street, Westminster. Allowed to prove guns by Gun Makers Company 1730. Allowed to bind apprentices in Gun Makers Company 1734-56. Parliament Street, Westminster, 1763. Gunmaker to Ordnance 1756. East India Company 1761)
Stock No. 4190